Unofficial English translation prepared by Khalid Khan Advisory from the Arabic text published in the official publication of the Ministry of Human Resources and Social Development (hrsd.gov.sa). Only the Arabic text is authentic. The Ministry's English "Procedural Manual for the Saudization Resolution of Technical Engineering Professions" covers the 2025 version (Decision No. 103105). No English version of the 2026 update at the date of translation. Translation as of 15 November 2026; check the Arabic text on the Ministry of Human Resources and Social Development website and any later amendments before relying on a provision.
Kingdom of Saudi Arabia · Ministerial Decision and Procedural Guide
Ministerial Decision No. 97528 of 8 November 2026 and the Procedural Guide on the Decision to localise technical engineering professions
Ministerial Decision No. 97528 of 8 November 2026
The Minister of Human Resources and Social Development,
Pursuant to the powers granted to him by law;
Having reviewed Article Eleven bis and Article Thirty-Six of the Labour Law promulgated by Royal Decree No. (M/51) of 23/8/1426 AH, as amended;
Having reviewed Ministerial Decision No. 103105 of 26/7/1446 AH on the localisation of workers in technical engineering professions;
And in implementation of the "Localisation of Professions" initiative, one of the Ministry's initiatives announced on 20/1/1440 AH,
Decides as follows:
First: To approve the update of the procedural guide for technical engineering professions, in the form attached to this Decision.
Second: To apply the localisation ratios for technical engineering professions in accordance with the definitions, occupational titles and professional requirements set out in the procedural guide.
Third: This Decision shall operate in harmony with previous ministerial decisions on localisation and the regulation of the labour market. Where localisation ratios differ, the higher ratio shall apply.
Fourth: The Ministry shall take all necessary measures to ensure that establishments comply with this Decision. Penalties shall be applied to establishments that breach its provisions in accordance with the table of violations and penalties issued by Ministerial Decision No. 112377 of 21/8/1447 AH, as amended from time to time.
Fifth: The procedural guide for the localisation of technical engineering professions is an integral part of this Decision.
Sixth: Anything in previous decisions that conflicts with the provisions of this Decision is repealed, without prejudice to paragraph (Third).
Seventh: This Decision and the procedural guide shall be published on the Ministry's website and shall take effect from the date of publication.
Eighth: The Deputy Minister for Labour shall take the necessary steps to implement it.
Procedural Guide on the Decision to localise technical engineering professions
Section (1)
Introduction and purpose of the guide
In its concern, in partnership with the Ministry of Municipalities and Housing, to provide stimulating, productive and stable employment for Saudi men and women in all regions of the Kingdom and to raise their participation in the labour market, and with reference to Ministerial Decision No. 97528 of 08/11/2026 approving the update of the procedural guide for technical engineering professions and applying the localisation ratio for technical engineering professions in establishments from 09/05/2027, the Ministry of Human Resources and Social Development has issued this guide.
The Decision has taken into account labour market conditions in the targeted professions, the number of job seekers who are graduates of the relevant disciplines, those currently studying disciplines related to the targeted professions who will join the labour market in the next few years, and the reality of the private sector and its capacity to absorb national professional talent.
This guide explains all the details of the Decision to localise the targeted professions, including the required ratios, the scope of the Decision, the targeted professions, the method of calculating the ratio, and penalties. It also explains the support programmes offered by the human resources system to help the private sector implement the Decision, and answers frequently asked questions.
Section (2)
Definitions
Localisation Decision: Decision No. 97528 of 08/11/2026 of the Minister of Human Resources and Social Development on applying the localisation ratio to technical engineering professions in the private sector.
Localisation ratios: the localisation ratio required for technical engineering professions under the calculation method set out in this guide.
Establishment: any project run by a natural or legal person employing one or more workers for a wage of any kind.
Entity: the capacity in which the Ministry will deal with the establishment for localisation purposes, representing all branches of the same economic activity owned by one establishment.
Technical engineering professions: applied technical occupations requiring specialised knowledge and skills in fields connected with engineering work, including contributing to the preparation of technical drawings and plans, carrying out technical works and following them up, carrying out measurements, tests and inspections, installing, operating and maintaining systems and equipment, detecting and dealing with faults, collecting data and preparing technical reports, and checking that works comply with approved specifications and standards, so as to support the execution of projects and engineering works and ensure their efficiency, quality and safety, in accordance with the rules and requirements approved by the Council.
Implementation period: the period in which the establishment must implement the Decision, during which it is exposed to statutory measures and penalties if it does not meet the localisation ratio for technical engineering professions (see the mechanism for applying penalties and statutory measures).
Grace period: the period between the date of publication of the ministerial decision and the date of its application, during which the establishment may work towards achieving the localisation ratio and its target.
Support and employment: the support and employment programmes offered by the human resources system to encourage and support the sector.
General conditions of the Localisation Decision
Section (3.1)
Required ratios
A localisation ratio of 35% applies to the total number of workers in the targeted occupations listed in Table No. (1) of this guide, at the level of the establishment's entity.
Section (3.2)
Scope of the Decision
This Decision applies to all private-sector establishment entities operating in the Saudi market that employ 5 or more workers in the technical engineering occupations listed in Table No. (1). Where technical engineering professions are targeted in earlier or later decisions for a specific occupation or occupations at different ratios, in line with changes in the labour market and its needs, the higher localisation ratio applies.
Section (3.3)
Professional accreditation
Workers must obtain professional accreditation from the Saudi Council of Engineers for the occupations the Council accredits, in accordance with the Law on the Practice of Engineering Professions and its implementing regulations.
Section (3.4)
Targeted occupations
The Decision applies to all targeted occupations according to the Saudi Unified Classification of Occupations issued by the General Authority for Statistics, as listed in Table No. (1).
| Occupation code | Occupation |
|---|---|
| 311805 | Architectural draughtsman |
| 723203 | Aircraft engine mechanic |
| 311804 | Architectural model technician |
| 311512 | Railway mechanical technician |
| 216502 | Cartographer |
| 712703 | Refrigeration mechanic |
| 311802 | Road plans draughtsman |
| 712702 | Heating, ventilation and air conditioning mechanic |
| 311801 | Engineering draughtsman |
| 712701 | Compressor mechanic |
| 311210 | Road maintenance technician |
| 311511 | Mechanical maintenance technician |
| 311201 | Civil engineering technician |
| 311106 | Physics technician |
| 311203 | Construction materials technician |
| 311602 | Chemical plant technician |
| 216501 | Aerial surveyor |
| 311205 | Construction maintenance technician |
| 216506 | Mining surveyor |
| 311207 | Building maintenance technician |
| 311211 | Surveying technician |
| 311601 | Chemical engineering technician |
| 311803 | Specifications draughtsman |
| 313402 | Oil refining technician |
| 311301 | Electrical engineering technician |
| 311208 | Excavation shoring technician |
| 311305 | Electrical machinery maintenance technician |
| 723306 | Drilling rig mechanic |
| 313103 | Power distribution technician |
| 311204 | Construction technician |
| 311308 | Electromechanical technician |
| 351103 | Digital printing technician |
| 313104 | Power transmission technician |
| 312301 | Building construction supervisor |
| 313102 | Power station control panel technician |
| 312302 | Road construction supervisor |
| 313101 | Power generation plant operator |
| 312201 | Manufacturing supervisor |
| 311302 | Overhead distribution network electrician |
| 312203 | Maintenance supervisor |
| 311304 | Electrical installations electrician |
| 312304 | Construction maintenance supervisor |
| 311303 | Underground distribution network electrician |
| 312303 | Construction site supervisor |
| 311306 | Electrical equipment maintenance technician |
| 313202 | Waste incinerator operator |
| 311307 | Electrical network maintenance technician |
| 313201 | Desalination plant operator |
| 311309 | Electrical protection systems electrician |
| 311705 | Mine and quarry control unit operator |
| 311405 | Precision instruments technician |
| 213301 | Environmental specialist |
| 311403 | Electronic equipment technician |
| 226301 | Environmental protection specialist |
| 742101 | Aircraft electronics technician |
| 216507 | Photogrammetric surveyor |
| 741208 | Aircraft electrician |
| 214905 | Quantity surveyor |
| 741301 | Electrical cable jointer |
| 311906 | Production engineering technician |
| 311404 | Electronic equipment maintenance technician |
| 216505 | Land surveyor |
| 311409 | Electronic engineering technician |
| 343202 | Interior design technician |
| 311501 | Mechanical engineering technician |
| 352102 | Recording technician |
| 721202 | Underwater welder |
| 216504 | Hydrographic surveyor |
| 311510 | Plumbing, heating and gas mechanical technician |
| 313303 | Chemical process control panel technician |
| 311502 | Heating, ventilation and air conditioning technician |
| 311107 | Hydrology technician |
| 311506 | Engine mechanical technician |
| 232006 | Architecture and building crafts trainer |
| 311507 | Vehicle mechanical technician |
| 311407 | Autotronics technician |
| 311505 | Chassis mechanical technician |
| 311904 | Quantity estimating technician |
| 311508 | Heavy equipment mechanical technician |
| 313205 | Water operations controller |
| 242113 | Aviation affairs specialist |
| 311206 | Building insulation technician |
| 216503 | Geodetic surveyor |
| 311104 | Chemical technician |
| 311509 | Agricultural equipment mechanical technician |
| 313301 | Chemical operations technician |
| 311513 | Propeller aircraft mechanical technician |
| 311105 | Geology technician |
| 311514 | Jet aircraft mechanical technician |
| 232003 | Engineering crafts trainer |
| 723202 | Airframe repair mechanic |
| 311902 | Mechatronics technician |
| 723201 | Aircraft mechanic |
| 216401 | Urban planner |
Section (3.5)
Method of calculating the localisation ratios
The example below shows how the localisation ratio is calculated for the localised occupations at the 35% ratio listed in Table No. (1).
Example: establishment entity (A), total number of workers: (93), working in various departments and occupations.
Distribution of workers in the establishment: cleaner 5; administrative 14; engineer 23; technician* 51. (* Among the occupations targeted by the Decision.)
Technicians by title (51 in total): mechanical maintenance technician, 1 Saudi and 15 non-Saudis; land surveyor, 1 Saudi and 15 non-Saudis; manufacturing supervisor, 1 Saudi and 7 non-Saudis; architectural draughtsman, 1 Saudi and 10 non-Saudis.
Applying the 35% localisation ratio to the establishment's entity for technical engineering professions: total workers in technical engineering occupations in the entity: 51; total Saudis: 4; total non-Saudis: 47.
Applying the ratio: (total number of technicians × localisation ratio) minus total number of Saudi technicians in the entity = (51 × 35%) - 4 = 13.85, rounded to the nearest whole number: 14.
Required of the establishment's entity: it has 4 Saudi technicians, so it must replace* 14 non-Saudi technicians with Saudi employees, bringing the total to 18 Saudis out of 51 workers in the occupations listed in Table No. (1) during the grace period, to achieve the localisation ratio for technical engineering professions in the establishment.
* Calculated on the replacement principle. If Saudis are added to the existing workforce (Saudis and non-Saudis), the calculation is made again to reach the required ratio.
Section (3.6)
Date of application and grace period
The grace period is the period that allows the establishment to work towards the targeted localisation ratios in order to reach its set targets. After this period, the penalties provided for in this guide, in addition to statutory penalties, will be applied to all establishments that have not complied with the required localisation ratio.
Issue of the ministerial decision: 08/11/2026. Grace period: 6 months. Start of application: 09/05/2027.
Section (4)
Support and employment programmes
A package of incentives and support will be provided to help private-sector establishments, including the following:
1. Support for recruitment and the search for suitable talent for available jobs.
2. Support for the training and qualification needed by Saudi employees.
3. Support for employment and job stability.
4. Priority access to all localisation support programmes available in the system.
Section (5)
Mechanism for applying penalties and statutory measures
The Ministry shall take all necessary measures to ensure that establishments comply with this Decision. The penalties in the table of violations and penalties issued by Ministerial Decision No. (112377) of 21/8/1447 AH shall be applied if the establishment does not comply with the required localisation ratio, or assigns any of the tasks of the localised occupations to a non-Saudi worker, directly or indirectly, under any other job title, taking into account any amendments to that Decision.
Section (6)
Frequently asked questions
Does the professions localisation decision apply in parallel with Nitaqat?
The professions localisation decision applies to the occupations targeted by the Decision within the establishment, and the statutory penalties are applied regardless of the establishment's Nitaqat band. The establishment's band does not affect the calculation of the localisation ratio for technical engineering professions.
Does the Decision apply to occupational titles only, or to the worker's actual work?
The Decision applies to the occupations shown in Table No. (1), meaning the occupational titles classified in the Saudi Unified Classification of Occupations issued by the General Authority for Statistics, and to the worker's actual work.
Will the localisation ratio for technical engineering professions be changed in future?
The Ministry of Human Resources and Social Development works to reduce unemployment and to provide decent jobs for citizens through a number of initiatives. To this end, the Ministry periodically reviews the required localisation ratios, taking into account the number of graduates and job seekers and the capacity of the market, to ensure that graduates join the labour market as a matter of course.
How is compliance calculated?
Compliance with the localisation ratios is monitored entirely automatically by the system. It applies the formula to the occupational titles in the social insurance database, then verifies the data through technical links with the supervisory bodies. If the establishment's entity does not comply, penalties are applied as described in the mechanism for applying penalties and statutory measures above.
Eng. Ahmed bin Sulaiman Al-Rajhi
Minister of Human Resources and Social Development