Unofficial English translation prepared by Khalid Khan Advisory from the Arabic text published in the official publication of the Ministry of Human Resources and Social Development (hrsd.gov.sa). Only the Arabic text is authentic. The Ministry publishes English versions of some localisation guides, but not of this one at the date of translation. Translation as of 15 November 2026; check the Arabic text on the Ministry of Human Resources and Social Development website and any later amendments before relying on a provision.
Kingdom of Saudi Arabia · Ministerial Decision and Procedural Guide
Ministerial Decision No. 93483 of 31 December 2025 and the Procedural Guide on the Decision to localise engineering professions
Ministerial Decision No. 93483 of 11/07/1447 AH (31 December 2025)
The Minister of Human Resources and Social Development,
Pursuant to the powers granted to him by law;
Having reviewed Article Eleven bis and Article Thirty-Six of the Labour Law promulgated by Royal Decree No. (M/51) of 23/8/1426 AH, as amended;
Having reviewed Ministerial Decision No. 99895 of 9/7/1445 AH;
And in implementation of the "Localisation of Professions" initiative, one of the Ministry's initiatives announced on 20/1/1440 AH,
Decides as follows:
First: To approve the update of the procedural guide for engineering professions, in the form attached to this Decision.
Second: To apply the localisation ratios for engineering professions in accordance with the definitions, occupational titles and professional requirements set out in the procedural guide.
Third: This Decision shall operate in harmony with previous ministerial decisions on localisation and the regulation of the labour market. Where localisation ratios differ, the higher ratio shall apply.
Fourth: The Ministry shall take all necessary measures to ensure that establishments comply with this Decision. Penalties shall be applied to establishments that breach its provisions in accordance with the table of violations and penalties issued by Ministerial Decision No. 75913 of 19/5/1445 AH and Ministerial Decision No. 44558 of 3/4/1446 AH, as amended from time to time.
Fifth: The procedural guide for the localisation of engineering professions is an integral part of this Decision.
Sixth: Anything in previous decisions that conflicts with the provisions of this Decision is repealed, without prejudice to paragraph (Third).
Seventh: This Decision and the procedural guide shall be published on the Ministry's website and shall take effect from the date of publication.
Eighth: The Deputy Minister for Labour shall take the necessary steps to implement it.
Procedural Guide on the Decision to localise engineering professions
Section (1)
Introduction and purpose of the guide
In its concern, in partnership with the Ministry of Municipalities and Housing, to provide stimulating, productive and stable employment for Saudi men and women in all regions of the Kingdom and to raise their participation in the labour market, and with reference to Ministerial Decision No. 93483 of 31/12/2025 approving the update of the procedural guide for engineering professions and applying the localisation ratio for engineering professions in establishments from 30/06/2026, the Ministry of Human Resources and Social Development has issued this guide.
The Decision has taken into account labour market conditions in the targeted professions, the number of job seekers who are graduates of the relevant disciplines, those currently studying disciplines related to the targeted professions who will join the labour market in the next few years, and the reality of the private sector and its capacity to absorb national professional talent.
This guide explains all the details of the Decision to localise the targeted professions, including the required ratios, the scope of the Decision, the minimum wage counted towards the localisation ratio, the targeted professions, the method of calculating the ratio, and penalties. It also explains the support programmes offered by the human resources system and the specialised bodies to help the private sector implement the Decision, and answers frequently asked questions.
Section (2)
Definitions
Localisation Decision: Decision No. 93483 of 31/12/2025 of the Minister of Human Resources and Social Development on applying the localisation ratio to engineering professions in the private sector.
Localisation ratios: the localisation ratio required for engineering professions under the calculation method set out in this guide.
Establishment: any project run by a natural or legal person employing one or more workers for a wage of any kind.
Entity: the capacity in which the Ministry will deal with the establishment for localisation purposes, representing all branches of the same economic activity owned by one establishment.
Engineering professions: all occupations classified as engineering occupations in the Saudi Unified Classification of Occupations and targeted for localisation by the Ministry of Human Resources and Social Development, as detailed in this guide.
Professional accreditation: professional accreditation membership for a holder of a bachelor's degree in an engineering, engineering technology or architecture discipline from a regular academic programme at a college or university recognised in the country of graduation, or its equivalent, according to the registration requirements.
Implementation period: the period in which the establishment must implement the Decision, during which it is exposed to statutory measures and penalties if it does not meet the localisation ratio for engineering professions (see the mechanism for applying penalties and statutory measures).
Grace period: the period between the date of publication of the ministerial decision and the date of its application, during which the establishment may work towards achieving the localisation ratio and its target.
Support and employment: the support and employment programmes offered by the human resources system to encourage and support the sector.
General conditions of the Localisation Decision
Section (3.1)
Required ratios
Thirty per cent (30%) of the total number of workers in the targeted occupations listed in Table No. (1) shall be Saudis, calculated at the level of the entity.
Section (3.2)
Scope of the Decision
This Decision applies to all private-sector establishments operating in the Saudi market that employ 5 or more workers in the engineering occupations listed in Table No. (1). Where engineering professions are targeted in earlier or later decisions for a specific occupation or occupations at different ratios, in line with changes in the labour market and its needs, the higher localisation ratio applies.
Section (3.3)
Minimum wage counted towards the localisation ratio
For a Saudi engineer to count towards the required localisation ratio in engineering professions, his monthly wage registered with the General Organization for Social Insurance (the contributory wage) must be not less than SAR 8,000. A Saudi engineer paid less than that will not count towards the localisation ratio under this Decision.
Section (3.4)
Professional accreditation
The engineer must hold professional accreditation from the Saudi Council of Engineers. Engineers who are not accredited are not counted towards the required localisation ratios.
Section (3.5)
Targeted occupations
The Decision applies to all the targeted occupations listed in Table No. (1).
| Occupation code | Occupation |
|---|---|
| 214904 | Materials engineer |
| 215104 | Electromechanical engineer |
| 214201 | Civil engineer |
| 215105 | Automation engineer |
| 214601 | Mining engineer |
| 215106 | Power generation engineer |
| 216101 | Architect |
| 216102 | Interior architect |
| 214409 | Heavy machinery mechanical engineer |
| 214206 | Road engineer |
| 214103 | Production technology engineer |
| 214207 | Bridge engineer |
| 214202 | Civil engineering technologist |
| 214404 | Aeronautical engineer |
| 214204 | Geotechnical engineer |
| 215108 | Electrical installations engineer |
| 214205 | Structural engineer |
| 214602 | Metallurgical engineer |
| 214302 | Water treatment engineer |
| 214407 | Welding engineer |
| 214303 | Sanitary engineer |
| 214102 | Production engineer |
| 214402 | Mechanical engineering technologist |
| 215101 | Electrical engineer |
| 214408 | Railway mechanical engineer |
| 214401 | Mechanical engineer |
| 214411 | Turbine engineer |
| 216201 | Site design engineer |
| 214412 | Mechatronics engineer |
| 214101 | Industrial engineer |
| 214502 | Chemical engineering technologist |
| 215201 | Electronics engineer |
| 214504 | Water desalination engineer |
| 214301 | Environmental engineer |
| 214603 | Petroleum and gas engineer |
| 214406 | Heating, ventilation and air conditioning engineer |
| 214902 | Cost engineer |
| 214410 | Automotive engineer |
| 214903 | Explosives engineer |
| 214501 | Chemical engineer |
| 214906 | Quality control engineer |
| 214915 | Nuclear engineer |
| 214908 | Research and development engineer |
| 214405 | Marine engineer |
| 215102 | Electrical engineering technologist |
| 215107 | Power transmission and distribution engineer |
Section (3.6)
Method of calculating the localisation ratios
The Decision applies to all occupations classified as engineering occupations in the Saudi Unified Classification of Occupations approved by the Ministry of Human Resources and Social Development and listed in Table (1). The example below shows how the localisation ratio is calculated.
Distribution of workers in the establishment: cleaner 5; administrative 14; engineer 51; technician 23.
Engineers by title (51 in total): civil engineer, 1 Saudi and 15 non-Saudis; mechanical engineer, 1 Saudi and 15 non-Saudis; production engineer, 1 Saudi and 7 non-Saudis; architect, 1 Saudi and 10 non-Saudis.
Applying the 30% localisation ratio to the establishment's engineering professions: total Saudi engineers in the establishment: 4; total non-Saudi engineers: 47; total engineers: 51.
Applying the ratio (30%): (total number of engineers × localisation ratio) minus total number of Saudi engineers in the establishment = (51 × 30%) - 4 = 11.3, rounded to the nearest whole number: 11.
Required of the establishment: it has 4 Saudi engineers, so it must replace* 11 non-Saudi engineers with Saudi engineers, bringing the total to 15 Saudi engineers out of 51 during the grace period, to achieve the localisation ratio for engineering professions.
* Calculated on the replacement principle. If Saudis are added to the existing workforce (Saudis and non-Saudis), the calculation is made again to reach the required ratio.
Section (3.7)
Date of application and grace period
The grace period is the period that allows the establishment to work towards the targeted localisation ratios in order to reach its set targets. After this period, the penalties provided for in this guide, in addition to statutory penalties, will be applied to all establishments that have not complied with the required localisation ratio.
Issue of the ministerial decision: 31/12/2025. Grace period: 6 months. Start of application: 30/06/2026.
Section (4)
Support and employment programmes
A package of incentives and support will be provided to help private-sector establishments employ Saudi engineers, including the following:
1. Support for recruitment and the search for suitable talent for available jobs.
2. Support for the training and qualification needed by Saudi employees.
3. Support for employment and job stability.
4. Priority access to all localisation support programmes available in the system.
Section (5)
Mechanism for applying penalties and statutory measures
If the establishment does not comply with the required localisation ratio, or assigns any of the tasks of the localised occupations to a non-Saudi worker, "directly or indirectly", under any other job title, the penalties for localisation violations provided for in Ministerial Decision No. 75913 of 19/05/1445 AH and Ministerial Decision No. 44558 of 03/04/1446 AH shall be applied, as amended from time to time.
Section (6)
Frequently asked questions
Does the professions localisation decision apply in parallel with Nitaqat?
Yes. The professions localisation decision applies to the occupations it targets at the level of the entity, and the statutory penalties are applied regardless of the establishment's Nitaqat band. The establishment's band does not affect the calculation of the localisation ratio for the occupations concerned.
Does the Decision apply to occupational titles only, or to the worker's actual work?
The Decision applies to the occupations shown in Table No. (1), meaning the occupational titles classified in the Saudi Unified Classification of Occupations issued by the General Authority for Statistics, and to the worker's actual work.
Will the localisation ratio for engineering professions be changed in future?
The Ministry of Human Resources and Social Development works to reduce unemployment and to provide decent jobs for citizens through a number of initiatives. To this end, the Ministry periodically reviews the required localisation ratios, taking into account the number of graduates and job seekers and the capacity of the market, to ensure that graduates join the labour market as a matter of course.
How is compliance calculated?
Compliance with the localisation ratios is monitored entirely automatically by the system. It applies the formula to the occupational titles in the social insurance database, then verifies wages and professional accreditation through technical links with the supervisory bodies. If the establishment does not comply, penalties are applied as described in the mechanism for applying penalties and statutory measures above.
Can the establishment use the Ministry's services during the grace period?
Yes. The Ministry's services may be used during the grace period for engineering occupations even if the localisation ratio has not been reached in those occupations.
Eng. Ahmed bin Sulaiman Al-Rajhi
Minister of Human Resources and Social Development